Europlast EER150WP – Heat Recovery Unit with a cable and switch

• Wall-Mounted heat recovery unit Europlast EER150WP, 150 mm diameter, with a cable and switch.
• This device is intended for maintaining the constant exchange of indoor air.
• Equipped with a regenerator that accumulates heat energy from the air flowing out of the rooms and heats up the air flowing into the rooms, thus ensuring minimum heat losses.
• Intended for continuous use.
• The operation cycle of the device comprises the following steps:
• Step I: Contaminated warm air is removed from the room in suction mode. As the air passes through the regenerator, it heats up. 70 seconds later, as the regenerator accumulates heat, the fan switches to flow mode.
• Step II: In flow mode, cold fresh air passes through the regenerator and heats up to room temperature. 70 seconds later, as the regenerator cools down, the fan switches to suction mode.
• Heat recovery efficiency up to 90%.
• The recuperative heat exchanger is equipped with a slide switch, and the cable is connected to mains socket. The fan is turned on and off with a switch mounted on the cable. The fan speed is controlled by pulling the cord at the fan bottom.
• Washable filters.
• A Energy efficiency class.
• Double electrical insulation against electrical shock.
• Humidity Protection: IPX4

Europlast EER User Manual.